23
Press and hold
11
key until activating the function menu. Rotate the
dial or use
[UP/DOWN]
keys to select the
menu 33 RPT MOD and press the dial.
Rotate the dial or use
21
[UP/DOWN]
keys
to select the value:
-:
Minus offset, means transmitting
frequency is lower than receiving
frequency.
+:
Plus offset, means transmitting
frequency is higher than receiving
frequency.
OFF:
OFFSET is turn off. Transmitting frequency is the same as
receiving frequency.
Press [PTT] to set and exit or press the dial to set and continue.
31
Press and hold
11
key until activating the function menu. Rotate
the dial or use
[UP/DOWN]
keys to select the menu 34 SCAN and
press the dial.
MENU 33: OFFSET DIRECTION
MENU 34: SCAN RESUME CONDITION
6
Parameter Setting Mode (SET MODE)
when open, SQL ring adjustment is inefficiency.
NOTE
The difference between the transmitting and receiving frequencies for
repeater operation is called shift or offset frequnecy.
Press and hold
11
key until activating the function menu.Rotate the
MENU 36: OFFSET FREQUENCY
Priority channels must be pre-programmed in P SCAN to set this
parameter.
Press and hold
11
key until activating the function menu. Rotate
the dial or use
[UP/DOWN]
keys to select
the menu 35 SCAN M and press the dial.
Rotate the dial or use
21
[UP/DOWN]
keys
to select the value:
MEN:
Scans all memory channels in the
channel scanning mode.
MSN:
Scans only Priority memory
channels in the channel scanning mode.
Press [PTT] to set and exit or press the dial to set and continue.
31
MENU 35: PRIORITY CHANNEL SCAN
S-3:
Squelch opens at 3 bar.
S-5:
Squelch opens at 5 bars.
S-9:
Squelch opens at 9 bars.
S-FULL:
Squelch opens at FULL-scale
reading only.
Press [PTT] to set and exit or press the dial to set and continue.
31
Rotate the dial or use
21
[UP/DOWN]
keys
to select the value:
TIME:
Pauses 5 seconds to receive the
signal and resume scanning.
BUSY:
Remains on the frequency until
the signal is gone, then resume
scanning after pausing 2 seconds.
SECEDE:
Cancels scanning when a
signal is received and stopped scanning.
Press [
31
PTT] to set and exit or press the
dial to set and continue.
