22
6
Press and hold
11
key until activating the function menu. Rotate
the dial or use
[UP/DOWN]
keys to select
the menu 26 NAME C and press the dial
so that the last digit starts flashing. Up to 7
characters can be registered in each memory channel.
Turn the dial to select desired first
21
character. Press the dial again to edit the
next. Press
key to store values and
exit the setting menu.
Press PTT to set and exit or press the dial to set and continue.
31
MENU 26: EDITING MEMORY NAME
Parameter Setting Mode (SET MODE)
The time-out timer limits the amount of continuously transmitting time.
When the transmitting reaches the selected TOT value, the transmission
will be automatically cut off and emits warning beep.
Press and hold
11
key until activating the function menu. Rotate
the dial or use
[UP/DOWN]
keys to select the menu 27 TOT and
press the dial.
MENU 27: TIME-OUT TIMER(TOT)
Press and hold
11
key until activating
the function menu. Rotate the dial or
use
[UP/DOWN]
keys to select themenu
No.28-31 menu The LCD displays "
PG
PA
", "
PG PB
", "
PG PC
", "
PG PD
" and
press the dial.
Rotate the dial or use
21
[UP/DOWN]
keys to select wanted value
Press [PTT] to set and exit or press the dial to set and continue.
31
MENU 28-31: MICROPHONE PA,PB, PC,PD kEY SETUP
4-5 minutes is common and recommended.
NOTE
TX:
When the Main band is transmitting,
the sub band receive is mute.
RX:
When the Main band is receiving, the
sub band receive is mute.
RX/TX:
Suspends the sub band receive at
any time.
Press [PTT] to set and exit or press the
31
dial to set and continue.
Rotate the dial or use
21
[UP/DOWN]
keys to
select the value:
1-30 Minutes, total of 30 setting
parameters.
OFF:
TOT is turn off.
Press [PTT] to set and exit or press the dial to set and continue.
31
For Menu details, please refer to Page 28-29, Microphone Operation.
NOTE
The squelch opens only when the signal strength reaches to the selected
S-meter reading.
Press and hold
11
key until activating the function menu. Rotate
the dial or use
[UP/DOWN]
keys to select the menu 32 RF SQL and
press the dial.
Rotate the dial or use
21
[UP/DOWN]
keys to
select the value:
MENU 32: RF SQUELCH
