10
4
Getting Acquainted
microphone
9
8
10
1
15
Appears while open grouping function.
16
Appears while Sub side in memory channel or Call
channel mode.
17
Appears while Channels setting in frequency reverse
function.
18
Not in use.
19
Appears channel frequency or channel name.
20
Appears channel number or grouping number.
21
MAIN
Appears while Main band.
22
P1
Appears when current channel is priority channel.
23
P2
Appears while channel setting in Scan skip.
24
P3
Flash while open Scan.
25
Appears while main/sub receive squelch opened.
26
MAIN:Transmit power indicator/receive indicator.
27
SUB:Receive indicator.
NO. KEY
FUNCTION
1
M/S
Switches between Main and Sub bands.
2
Number Key
Input VFO frequency or DTMF dial out etc.
3
PA
Switches between VFO and Memory modes.
PB
Changes CTCSS and DCS mode parameters.
PC
Starts and stops scanning.
PD
Transmit preprogrammed DTMF, 2TONE, 5TONE
code.
4
Band Indicator
The indicator light on for Main band.
5
TX/RX Indicator
(Main/Sub)
Illuminates red while transmitting, green while
receiving signals.
6
PTT
Push-TO-Talk key: Press this key to transmit.
7
UP
Increase frequency, channel number or setting
value.
8
DOWN
Decrease frequency, channel number or setting
value.
9
MIC
Speak here during transmission.
10
Speaker
When shut the speaker in the base, you can hear
the calling by this speaker.
MIC Connector Diagram(in the front view of connector)
AF out(speaker out)
