8
4
NO. KEY
FUNCTION
1 PWR(Power)
Press it to power On/Off the transceiver.
2 Main AF knob
Sub AF knob
Adjust Main band audio level.( Left )
Adjust Sub band audio level.( Right )
3 Main SQL ring
Sub SQL ring
Adjust Main band squelch level.( Left )
Adjust Sub band squelch level.( Right )
4 Dial Knob
Rotate it to choose frequency/channel. Press it to
set the left band as "Main Band". In function setup,
it works as confirm key. in scan mode, rotate it to
change scan directions.
5 FUNC/SET
Short press: Function Key
Long press: Enter Function Menu setting
6 [V/M]
Short press: Switches between VFO mode and
memory mode.
Long press: Switch VFO working frequency
Getting Acquainted
Front panel
Basic Functions
7 [CALL]
Short press: Switches to CALL channel.
Long press: When channel setting DTMF/5
Tone, press this key can edit ANI code calling.
(microphone input)
8 [MHz]
Short press: Changes frequency step by 1MHz in
VFO mode.
Long press: Open the
frequency reverse
function.
9 [TS/DCS]
Short press: Sets CTCSS and DCS values.
Long press: When channel setting CTCSS/
DCS, long press this key to open CTCSS/DCS
frequency scan.
10 [H/L]
Short press:Switches the output power in 4 levels.
Long press:Open the emergency alarm function
11 LED
indicators
I lluminates red while transmitting, green while
receiving signals.
12 [SCAN]
Short press: Starts scanning.
Long press: DTMF/2TONE/5TONE setting.
13 [MONI]
Long press:Opens squelch and cancels TSQ/DCS
temporary.
14
MIC
Connector
Connect the mic connector or data reading/writing,
cloning.
15 LCD Display
Displays frequencies, channels and other
operating parameters.
