13
BASIC OPERATIONS
2. Enter the desired frequency by keypad.
In VFO or FM VFO mode, you can directly input frequency by keypad.
Example: To enter 435.0125, press [4][3][5][0][1][2] then 5 appears and sets automatically. To enter 435.100,
press [4][3][5][1][0][0]. By pressing the last [0], a dot appears after the MHz unit and the frequency is
set. When an invalid numbers are entered, the display will return to the current state and an error beep
sounds.
FM Channel Searching
When transceiver in FM radio mode, press
A
FUN
key, LCD displays " " icon, then press
5
SCAN
to start FM searching. When one station is sought, LCD displays current station
frequency, you can listen to current station.
Receiving
When a signal is received, the LED lights will light up, the main channel receives indicator a green,
(Subchannel receives indicator blue and the TDR Mark will flash following), and you can hear the received
call.
NOTE: Please be aware of the squelch level and selective-calling settings such as CTCSS and DCS as you
may risk not hearing the receiving signal.
Transmitting
According to [MONI] key setup in programming software, hold [MONI] key to monitor the channel to
