19
TX Power selection
Under standby state, press
A
FUN
key, the top left corner of LCD displays "
" icon,
then press
9
HI/LO
key to choose High/Low power for current channel.
1. When LCD displays "
L
" icon, it means low power is chose.
2. When LCD displays "
H
" icon, it means high power is chose.
3.When LCD displays
"M"
icon, it means Middle power is chose.
BASIC OPERATIONS
DTMF code Transmit and Enquiry
1. Press
A
FUN
key, the top left corner of LCD displays " " icon, then press
0
DTMF
key, LCD displays DTMF
data and group number (total 16 groups) of current group.
2. Press
B
/
C
to choose desired group and DTMF data, press [PTT] key to transmit
selected DTMF signaling. If current group not edit DTMF data, LCD displays the
current group number and "
EMPTY
".
Frequency Reverse
Under standby state, press
A
FUN
key, the top left corner of LCD displays "
" icon, then press
7
REV
key to
set the current channel as frequency reverse, repeat above operation to turn off frequency reverse.
1. When LCD displays "
R
" icon, it means current channel open the frequency reverse
function, the TX frequency and RX frequency is interchanged, if CTCSS/DCS
signaling is set, it will also interchange.
2. When "
R
" icon disappears, it means reverse function is close.
