46
Cable Cloning
With this function, you can copy the programming data of the transceiver to another one; it can copy
parameters and memory programming data to another transceiver.
Connection: use wire cloning cable of your own to connect main transceiver with sub-transceiver through
reading / writing programmable interface.
Setup: Shutdown state
Hold
1.
4
side key to power on, LCD displays
"CLONE"
, main transceiver enters into copy mode.
Press [PTT] key , LCD displays
2.
"CLONE XX"
, XX means the transmitted data quantity.
After data copies completely, LCD displays
3.
"CLONE"
.
Main transceiver stays in this mode preparing to next copy, restart main transceiver to exit copy
4.
mode.
Setup: sub-transceiver party.
When receiving data, LCD displays
1.
"CLONE XX "
, XX means the received data quantity.
After data received sub-transceiver returns to normal mode.
2.
Power off, take over cable line and link to another sub-transceiver which you want to copy. If data can
3.
not transfer successfully, power off main transceiver and sub-transceiver, check the cable line and
repeat the process.
AUXILIARY FUNCTIONS
For dealers only. Please contact the authorized importer of your area for more details.
