19
TX Power selection
Under standby state, press
A
FUN
key, the top left corner of LCD displays " " icon,
then press
9
HI/LO
key to choose High/Low power for current channel.
1. When LCD displays
"L"
icon, it means low power is chose.
2. When LCD displays
"H"
icon, it means high power is chose.
3. When LCD displays
"M"
icon, it means Middle power is chose.
BASIC OPERATIONS
DTMF Code Transmit and Enquiry
1. Press
A
FUN
key, the top left corner of LCD displays " " icon, then press
0
DTMF
key, LCD displays
DTMF data and group number (total 16 groups) of current group.
2. Press
B
/
C
to choose desired group and DTMF data, press [PTT] key to
transmit selected DTMF signaling. If current group not edit DTMF data, LCD
displays the current group number and
"EMPTY"
.
Frequency Reverse
Under standby state, press
A
FUN
key, the top left corner of LCD displays " " icon, then press
7
REV
key
to set the current channel as frequency reverse, repeat above operation to turn off frequency reverse.
1. When LCD displays
"R"
icon, it means current channel open the frequency reverse function, the TX
frequency and RX frequency is interchanged, if CTCSS/DCS signaling is set, it
will also interchange.
2. When "R" icon disappears, it means reverse function is close.
