46
Setup: Shutdown state
1. Hold
4
side key to power on, LCD displays
"CLONE"
, main transceiver enters into copy mode.
2. Press [PTT] key , LCD displays
"CLONE XX"
, XX means the transmitted data quantity.
3. After data copies completely, LCD displays
"CLONE"
.
4. Main transceiver stays in this mode preparing to next copy, restart main transceiver to exit copy
mode.
Setup: sub-transceiver party.
1. When receiving data, LCD displays
"CLONE XX "
, XX means the received data quantity.
2. After data received sub-transceiver returns to normal mode.
3. Power off, take over cable line and link to another sub-transceiver which you want to copy. If data can
not transfer successfully, power off main transceiver and sub-transceiver, check the cable line and
repeat the process.
AUXILIARY FUNCTIONS
For dealers only. Please contact the authorized importer of your area for more details.
Cable Cloning
With this function, you can copy the programming data of the transceiver to another one; it can copy
parameters and memory programming data to another transceiver.
Connection: use wire cloning cable of your own to connect main transceiver with sub-transceiver through
reading / writing programmable interface.
