Alimak ALC II, Руководство пользователя

Страница: 27 / 62

Landings are NOT stored into system
Calibration drive from inside of the car when lift is located at
bottom landing:
The display shows:
(no landings are programmed into the system):
– Press Up button and the lift will automatically start upwards
until it has left the reference cam and then it stops.
– The lift now automatically moves back down to the bottom
landing and stops on the reference cam.
The display shows:
The reference level is now programmed into the system.
The lift is now back into normal mode but no landings
are programmed into the system.
See page Programming of landings.
Calibration drive from inside of the car when lift is located
somewhere above the bottom landing:
The display shows:
(no landings are programmed into the system):
– Press Down button and the lift will automatically start
downwards to the bottom landing and stops on the reference
cam. (”Ref. down” LED goes out).
The display shows:
The reference level is now programmed into the system.
The system is now back into normal mode, but no landings
are programmed into the system.
See page Programming of landings.
ALIMAK 34828 - 1 /04
CD flashes on the display
for the single system.
CD flashes on the display
for the single system.
A
21