Alimak ALC II, Руководство пользователя

Страница: 34 / 62

Programming of landings
The lift shall be in normal operation mode.
– Press the Prog. button inside the car electrical panel until the
PROG. LED is illuminated. The lift is now in programming
mode.
The displays show (if no landings are programmed into the
system):
– Run the lift with the Up and Down button inside the car
to the bottom landing level. Check that the lift has not
actuated the down limit switch when it is level with the
bottom landing. (The same goes for the top landing).
– Press the Stop Next Landing button.
The system will unlock the doors one by one.
Open suitable door for the landing in question.
(If not, the
landing will be stored as a closed landing).
The Prog. LED goes out.
The first landing level is then programmed into the system
and the system returns to normal operation.
The display shows:
To program the next landing, proceed in the following manner:
– Press the Prog. button on the car CPU until the Prog. LED
is illuminated. The lift is now in programming mode.
The display shows:
– Run the lift with the Up and Down button inside the car to
the second landing level.
– Press the Stop Next Landing button.
The system will unlock the doors one by one.
Open suitable door for the landing in question.
(If not, the
landing will be stored as a closed landing).
The Prog. LED goes out.
The second landing level is then programmed into the
system and the systemt returns to normal operation.
ALIMAK 34831 - 1 /04
F5 lights up on the display
for the single system .
0 lights up on the display
for the single system.
0 and F5 flash
alternately on the
display for the single
system.
A
28
+
+