Align Technology iTero Element 5D Скачать руководство пользователя страница 50

Страница: 50 / 246

8. Attach the cradle (G) to the post

(B), and tighten using the small
Allen key.

9. Carefully remove the computing

unit (H) from its protective
wrapping.

Note:

The computing unit is

heavy and must be lifted
carefully.

10. Standing behind the wheel stand,

mount the computing unit on the
metal hinge and push down.
Attach the computing unit by
pushing in and tightening the
screw.

11. Tilt the screen upwards and

connect the screen cable.

12. Place the base of the wand (I) in

the cradle (G) and then apply
gentle pressure to make sure the
wand is fully inserted and secure
in the cradle.

13. Connect the wand cable to the

back of the screen (H).

14. Connect the power cable (J) to

the bottom of the wheel stand.

iTero Element 5D and iTero Element 5D Plus imaging systems User manual

Содержание iTero Element 5D





















































































































































































































































Результаты поиска

Содержание iTero Element 5D

Отзывы:

Бренды по названию

Популярные бренды

Align Technology iTero Element 5D, Руководство пользователя

Результаты поиска

Содержание iTero Element 5D

Отзывы:

Бренды по названию

Популярные бренды