Alienware P150G, Руководство по обслуживанию

Страница: 21 / 73

Next steps
1. Install the
base cover .
2. Follow the procedure in After working inside your computer .
Solid-state drive
Removing the M.2 2280 solid-state drive
Prerequisites
1. Follow the procedure in
Before working inside your computer .
2. Remove the base cover .
About this task
NOTE: The following procedure applies only to computers shipped with an M.2 2280 solid-state drive.
NOTE: The M.2 card supported on this slot depends on the configuration ordered. Supported card configurations. Supported
card configurations:
●
M.2 2230 solid-state drive + 2230 mounting bracket
● M.2 2280 solid-state drive
The following image(s) indicate the location of the M.2 2280 solid-state drive and provides a visual representation of the removal
procedure.
Steps
1. Remove the screw (M1.6x1.8) that secures the solid-state drive thermal shield to the solid-state drive and palm-rest and keyboard
assembly.
2. Lift and remove the solid-state thermal shield off the solid-state drive.
3. Slide and remove the solid-state drive from the solid-state drive slot.
21