ALIBI ALI-PTZ23XR, Руководство пользователя

Страница: 63 / 88

57 HD-TVI 23x Zoom PTZ Camera User Manual
SECTION 5: OSD MENU REFERENCE
•
PROPORTIONAL PAN
ning: When this function is enabled, the pan/tilt speed changes according to the amount of zoom. If
using high zoom, the pan/tilt speed is slowed to keep the image from moving too fast on the live view display. You can set
PROPORTIONAL PAN to ON or OFF to enable/disable the function. This function is enabled automatically while setting patterns.
•
SCAN SPEED : Scan speed defines the scan degree per second of a panning scan, tilting scan, frame scan, random scan and
panoramic scan. Scan speed is adjustable from 1 to 40 degrees per second.
To configure MOTION settings:
1. Open the MOTION PARAMETER submenu from the OSD | DOME SETTINGS menu.
MOTION menu page 1 MOTION menu page 2
2. Use the
u
and the
t
buttons to move between MOTION page 1 and page 2, as needed.
3. When the position icon is either a , or , use the
p
and
q
buttons to position the icon at the parameter you
want to change.
4. Click Iris+ . The position icon will change to a . NOTE : When the position icon is in front of SETTING STOPS and CLEAR
STOPS, clicking
Iris+
will open a different screen.
5. Use the
p
and
q
buttons to show the parameter to what you prefer.
6. Click
Iris+
again to change the parameter. The position icon will change to a .
7. Repeat steps
2
through
6
above to change the settings of other parameters.
If you opened
SETTING STOPS
, you can configure the scan range limits left, up, right and down. To set stops:
1. Use the p and q buttons to move the position icon to the SETTING STOPS option, and then click
Iris+
.
2. Use the u and the t buttons to move point the camera at the LEFT limit, and then click
Iris+
to continue.
3. Use the u and the t buttons to move point the camera at the RIGHT limit, and then click
Iris+
to continue.
4. Use the p and the q buttons to move point the camera at the UP limit, and then click
Iris+
to continue.