31
HD-TVI 23x Zoom PTZ Camera User Manual
SECTION 4: CONFIGURING THE PTZ CAMERA
8.
Click
IRIS+
to save the blank.
9.
Use steps
2
through
8
above to create additional blanks if needed.
4.6 Step 3: Configuring OSD settings
The SYS INFO SETTINGS submenus are provided to adjust the general system parameters including software setup of the RS-485
network settings, fan and heat control, and other options. It also includes two submenus for setting the system time and display
options, and an additional screen for setting the ZERO ANGLE. To configure these settings:
1.
Open the
SYS INFO SETTINGS
submenu from the OSD
MAIN MENUS | DOME SETTINGS
menu. The SYS INFO SETTINGS
submenu includes three pages; you can move between these pages using the
u
and the
t
buttons.
SYS INFO SETTINGS page 1
SYS INFO SETTINGS page 2
SYS INFO SETTINGS page 3
To change a parameter value:
2.
Use the
p
and
q
buttons to move the position icon to the parameter you want to change, and then click
Iris+
. The
position icon will change to a .
NOTE
: If the position icon is before SYS TIME or DISPLAY SETTINGS, a submenu will open.
See below.
