18
SECTION 3: GETTING STARTED
3.2.1 Manchester code control protocols
The system-defined presets for the Manchester code control protocol with special functions are shown as below.
Preset No.
Function
Preset No.
Function
65
Remote reboot
70
Run Pattern 1
66
Access main menu
71
Run Pattern 2
67
Auto-flip
72
Run Pattern 3
69
Stop programming pattern
3.3 On Screen Displays
The camera supports following on screen displays:
•
Zoom Ratio
: Identifies the amount of magnification. The format is ZXXX. XXX is the magnification factor.
•
PT Angle
: Displays panning and tilting direction, with the format of NEXXX/TXXX. The NE followed with XXX indicates the
degrees in north east direction, while the T followed with XXX indicates the degrees in tilt position.
•
Alarm
: When an alarm is triggered, the corresponding information will be displayed.
•
Time
: Displayed as Day/Month/Year/Day of Week/Hour/Minute. It supports 24-hour time system. Preset Label: After you call
the configured preset, the preset number is displayed if the lens moves to the certain place where you’ve set a preset for.
•
Zone
: Display the zone title.
•
Address
: Display the address of the speed dome.
•
Error Rate
: Display the error rate of the speed dome.
•
Fan and Heat
: Display the heat information of the speed dome.
