CAUTION
When the air filter is to be
removed, do not touch the
metal parts of the unit.
It may cause an injury.
Since the fan rotates at high
speed during operation, it may
cause an injury.
It may cause an electric shock.
When the unit is to be
cleaned, switch off, and
turn off the breaker.
Do not operate switches
with wet hands.
Do not clean the air
conditioner with water.
Water may enter the unit and
degrade the insulation. It may
cause an electric shock.
This could injure the pets or
plants.
It may cause a fire or deformation
or the cabinet.
Do not put a pet or house
plant where it will be
exposed to direct air flow.
Do not apply an insecticide
or flammable spray.
Ventilate well when used
together with a stove, etc.
An oxygen shortage may occur.
Do not use this air conditioner
to preserve precision devices,
food,pets, plants, and art
objects.It may cause
deterioration of quality, etc.
It may cause imperfect
combustion.
Do not use for special
purposes.
Do not put a heater, etc.
Where it is exposed to
direct air flow.
!!
!!
Be sure the electrical service is adequate for the model you have chosen. This information can be found on the serial plate,
which is located on the side of the cabinet.
Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is important. The
power cord is equipped with a three-prong grounding plug for protection against shock hazards.
Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend to use is not ad
equately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper recept-
acle.
Ensure the receptacle is accessible after the unit installation.
Do not run air conditioner with outside protective cover in place. This could result in mechanical damage within the air con-
ditioner.
For your safety
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the
power cord.
Electrical Infor mation
Wor king temperature range
Cooling Operation
Outdoor temp:
O
18-43 C (T
1
Environment)
Indoor temp:
O
18-32 C (T
1
Environment)
O
21-52 C (T
3
Environment)
O
18-32 C (T
3
Environment)
Heating Operation
Outdoor temp:
O
-5-24 C (T
1
Environment)
Indoor temp:
O
0 -27 C (T
1
Environment)
O
-7-24 C (T
3
Environment)
O
0-30 C (T
3
Environment)
Note: Performance may be reduced outside of these operating temperatures.
Safety Precautions
