AUTO SWING
OFF
ON
Adjust air flow direction
Horizontal air flow adjustment
Vertical air flow adjustment (manually)
Vent control
The vent control is located above the control knobs. The operation
method is different on different models(see the figures on the left).
For maximum cooling efficiency, CLOSE the vent. This will allow I
nternal air circulation. OPEN the vent to discharge stale air.
To open the vent, pull the lever
toward you; To close it, push it in.
To open the vent, set the lever to the
right position; To close it, set the lever
in the left position.
CLOSE OPEN
NOTE:
The VENTILATION LEVER should normally be kept in the
CLOSED position during cooling for maximum cooling effect. The
"OPEN" position is used only for ventilation.
Clean your air conditioner occasionally to keep it looking new.
Be sure to unplug the unit before cleaning to prevent chock
or fire hazards.
CAUTION
CAUTION
CLOSE VENT OPEN
Operation instructions
When the AUTO SWING switch is turned to
ON
position, the
vertical louvers automatically oscillate right and left sweeping
the cold air alternately to obtain comfortable cooling. The
vertical louvers may be stopped at any position when the AUTO
SWING switch is turned
OFF
.
To adjust vertical air flow direction, adjust any one of the
horizontal louver blades. When turning up or down the
horizontal louver blades, always keep horizontality the top or
bottom blades. This can effectively prevent water drops
condensed on the front panel of the unit.
