Copyright
2005 Alfano, S.A. All rights reserved.
9
CONFIGURATION MENU
While in the STOP mode, press the left button for 1 second:
Afterwards, press the left button successively to access the menus 10 to 35.
Menu 10 :
STRIP NUMBER
1
Successively Press the right button:
>>
To configure the number of magnetic fields.
Menu 11 :
STRIP START
1
Successively Press the right button:
>>
To select the magnetic field on which the
AStrO LVF must start.
Menu 12 :
STRIP LATENCY
NOTE: This menu is only accessible when one single field is configured in menu 10. This configuration is
useful: either to ignore one or several split times, or to avoid acquiring other infrared ALFANO emitters
placed on the circuit at an untimely moment. This configuration does indeed allow you to program a time
upon which the system will not react after having acquired the time per lap.
NOTICE: this programmed time must be absolute less than that of the time per lap.
1
Press the right button:
>>
To enter the menu.
2
Continue to press or successively press the
right button on the UP arrows:
>>
To increase the time.
3
Continue to press or successively press the
right button on the DOWN arrows :
>>
To reduce the time.
4
Press the left button:
>>
To exit.
Menu 13 :
Best / Previous / Target
In order to select the comparison mode of the last loop time:
