![Alfano AStrO LVF A-165 Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/alfano/astro-lvf-a-165/astro-lvf-a-165_user-manual_2895594004.webp)
Copyright
2005 Alfano, S.A. Tous droits réservés.
4
Switching on the AStrO LVF
Hold the two buttons « left and right » simultaneously pressed for two seconds. By releasing the buttons,
the display appears and the system will ask you if you wish to activate the background screen or not. If
you wish to activate it, press the right button to select the option « ON ». On the other hand, selecting
the option « OFF » by pressing the left button or not doing anything, the device will automatically select
the option « OFF » after a period of 2 seconds.
Detection display of weak batteries
When the batteries are weak, the system will detect it and the 4 bright temperature detector lights will
start blinking rapidly one by one.
When the device is in the START mode, the system will automatically return to the STOP mode ten
minutes after weak batteries have been detected, and the message «
CHANGE BAT
» will appear. It is
absolutely necessary to replace the batteries since the system will refuse to restart in the
START
mode
and access the menu
« Config System »
.
Note:
a power cut while the ALFANO is in the START mode risks provoking a deterioration of the
registered information.
During the display of detected weak batteries, the other bright lights and the background light will
automatically switch off in order to reduce energy consumption.
Replacing the batteries
Important:
it is imperative to use quality batteries from big brand names to avoid these from running
in the device.
An interruption provoked by the battery’s acid cancels the warranty.
Prior to replacing the batteries, always verify that the device is switched off, take off the lid of the battery
compartment, remove the old batteries and afterwards place the two new batteries by verifying that the
symbols "+" et "-" correspond to those engraved on the exterior of the compartment.
Protective hoods
IMPORTANT
: the ports of the unused ports must
always be closed by furnished caps.
NOTICE:
Please only use a screwdriver of the type
TX20
(this type of screwdriver is provided to you
together with your ALFANO). Make sure you do not turn the screws to tightly. You could damage the
casing.