Copyright
2005 Alfano, S.A. Tous droits réservés.
12
1
Press the right button to enter the menu and
to regulate:
>>
The LOW level of: T1 « K ».
2
Continue to press or successively press
the right button on the UP arrows:
>>
To increase the level.
3
Continue to press or successively press
the right button on the DOWN arrows:
>>
To reduce the level.
4
Press the left button to regulate:
>>
The HIGH level of: T1 « K ».
5
Continue to press or successively press
the right button on the UP arrows:
>>
To increase the level.
6
Continue to press or successively press
the right button on the DOWN arrows:
>>
To reduce the level.
7
Press the right button to regulate:
>>
The LOW level of: T2 « K ».
Continue the same operations to regulate the levels of:
T2 « K » : LOW and HIGH
T1 « NTC » : LOW and HIGH
T2 « NTC » : LOW and HIGH
8
Press the left button:
>>
To exit.
NOTE: in the STOP and START modes:
The temperatures are lower than the LOW levels =
The detector lights REMAIN ILLUMINATED.
The temperatures higher than the HIGH levels
=
The detector lights ARE BLINKING.
Menu 17 :
PRESSURES
Activating « ON/OFF » the pressure sensors or not, and regulating the 2 detector lights, LOW pressure
and HIGH pressure:
P1: Pressure 1
P2: Pressure 2
1
Press the right button:
>>
To enter the menu.
2
Successively press the right button:
>>
To select sensor P1 or to deactivate it
2 Bar, 5 Bar, 10 Bar, OFF.
3
Press the left button:
>>
To position yourself at P2.
4
Successively press the right button:
>>
To select sensor P2 or to deactivate it
2 Bar, 5 Bar, 10 Bar, OFF.
The menus below will be accessible if the sensors have been activated.
5
Press the left button to regulate:
>>
The LOW level of P1.
6
Continue to press or successively press
the right button on the UP arrows:
>>
To increase the level.
7
Continue to press or successively press
the right button on the DOWN arrows:
>>
To reduce the level.
