Copyright
2005 Alfano, S.A. Tous droits réservés.
14
3
Afterwards, when the system displays
number 2, engage the 2
nd
gear:
>>
The system automatically configures the
ratio of box n°2.
4
Afterwards, when the system displays
number 3, engage the 3
rd
gear:
>>
The system automatically configures the
ratio of box n°3.
Continue the same operations to configure the other speeds.
5
Press the left button « END »:
>>
To terminate and exit.
IMPORTANT: It is absolutely necessary to connect the speed sensor and the RPM sensor to be able to
configure the gears of speed box.
Menu 20 :
G-FORCE / GYRO
Calibration of the sensor:
NOTE: prior to calibrating the AStrO LVF, place the vehicle on a horizontal surface.
1
Press the right button:
>>
To enter the menu.
2
Press the right button:
>>
To calibrate the AStrO LVF.
3
Press the left button:
>>
To exit.
IMPORTANT: It is absolutely necessary to connect the G-FORCE sensor to draw the trajectory with the
software "VISUALDATA".
Menu 21 :
LAMBDA ON / OFF
Activate « ON/OFF » or not the LAMBDA sensor:
NOTE: when the LAMBDA sensor is in the « ON » position, the 10 high LEDs of the AStrO LVF will solely
function with the Lambda probe.
Poor Normal Very good
1
Press the right button:
>>
To enter the menu.
2
Successively press the right button:
>>
To activate « ON/OFF » or not the
LAMBDA sensor.
3
Press the left button:
>>
To exit.
NOTICE: When the LAMBDA sensor is activated « ON », this sensor will replace the sensor of
temperature T2 « k » or the VALVE sensor, according to the previous configuration.
Menu 22 :
VALVE ON / OFF
Activate « ON/OFF » or not the VALVE sensor:
