ALFAMATIC CSQ-Visual, Руководство по установке, Страница: 15 / 16

15
3 Instructions for setting up the CSQ-Visual
Always disconnect the instrument from the electricity supply before opening it.
Open the CSQ-Visual by loosening the four screws in the corners of the front panel.
Figure 3
Pull out the internal cards by a few centimetres. Then release the cards from the front panel.
Figure 4
Pull out all the cards from the container and remove the five terminal block units.
To fasten the instrument in place it is possible to perforate the container on the top or bottom (after
removing all the cards) in the middle.
Fit the wire passage and plugs. To fit a larger wire passage, the hole C8 can be enlarged using a
stepped cutter.