26/37
ALFA IN a.s ©
www.alfain.eu
VITALITY OF CONSUMABLE PARTS
The need to change consumables on your torch depends on the thickness of the
material being cut, the length of the cut, the air quality (presence of moisture, oil
and dirt), the way the cut is started (side or puncture), the appropriate piercing
height, cutting mode (solid or perforated).
In general, the current set of consumables lasts an average of 1 to 3 hours of
cutting (ignited arc). Under normal conditions, the nozzle wears first when cutting
by hand, the electrode lasts about half as long as once.
When replacing o-ring 5790, lubricate the o-ring area with lubricant 7101.
HOW TO CHOOSE THE RIGHT CONSUMABLE PARTS
Torch SVH-105 use the same consumables that are protected, so the nozzles
can be pulled over the cut material.
For the best cut quality, it is necessary to use suitable sets of consumable
parts. The individual assemblies by power and type, including order numbers,
are listed in the table below.
TORCH SVS-105 MACHINE AND CONSUMABLES
NAMES OF SVS TORCH PARTS
Nozzle
Nozzle body Cutting tip Diffuser
Electrode
O-ring
Head
Position tube
TORCH SVS-105
