195
This device complies with Part 15 of the FCC
Rules
and
with
Industry
Canada
license-exempt RSS standard(s). Operation
is subject to the following two conditions:
This device may not cause harmful inter
-
ference, and
This device must accept any interference
received, including interference that may
cause undesired operation.
NOTE:
Changes or modifications not expressly
approved by the party responsible for compli
-
ance could void the user’s authority to
operate the equipment.
To comply with FCC RF exposure compliance
requirements, the device must be installed
to provide a separation distance of at least
20 cm (200 mm) from all persons.
USB/IPOD MODE
There are three USB ports located in your
vehicle: one under the air conditioner control
panel, one in the center console, and one
(charge only) under the air vents on the back
side of the center console. The AUX socket is
located inside the glove compartment in the
central console.
After using a USB recharging socket, we
recommend disconnecting the device
(smartphone). Always remove the cable from
the vehicle socket first, never from the
device. Cables left disconnected or
connected incorrectly could compromise
correct recharging and/or the USB socket
condition.
PHONE MODE
PHONE mode can be activated from the
main menu (MENU button) by turning and
pushing the Rotary Pad.
Phone Mode
The following control bar appears on the
display:
Recent calls
Favorites
Contacts
Dial
With call in progress:
Disable Microphone
End call
NOTE:
The mobile phone audio is transmitted
through the vehicle’s audio system; the
system automatically mutes the system
audio when the PHONE function is used.
Pairing A Mobile Phone
Proceed as follows:
1. Activate the Bluetooth function on the
device.
2. Press the MENU button, select the
“SETTINGS” function by turning and
pushing the Rotary Pad.
3. Select “Infotainment”.
4. Select Bluetooth.
5. Select "Add device".
6. Search for the Information and Entertain
-
ment system on the Bluetooth audio
device (during the pairing stage a screen
is displayed showing the progress of the
operation).
7. When requested by the audio device,
enter the PIN code shown on the system
display or confirm on the device the PIN
displayed.
8. When the pairing procedure is completed
successfully, a dedicated screen is
displayed.
2019_ALFA_GIULIA_COMBINED_UG_USA.book Page 195
Содержание Giulia 2019
Страница 1: ...2 0 1 9 U S E R G U I D E...
Страница 210: ...2019_ALFA_GIULIA_COMBINED_UG_USA book Page 208...