Alfa Romeo Giulia 2019, Руководство пользователя

Страница: 139 / 212

137
FUSES
Introduction
The fuses protect electrical systems against
excessive current.
When a device does not work, you must
check the electrical circuit inside the fuse
for a break/melt.
Also, please be aware that using power
outlets for extended periods of time with the
engine off may result in vehicle battery
discharge.
Fuse Extracting Pliers
To replace a fuse, use the pliers hooked to
the trunk fusebox cover.
Fuse Box
Grab the pliers from the upper tabs, press
the tabs together, and extract the pliers
pulling upwards.
The pliers have two different ends, both of
which are specifically designed to remove
the different types of fuses present in the
vehicle:
Fuse Extracting Pliers
After use, return the pliers to their proper
position by following the below procedures:

Grasp the pliers from the upper tabs and
insert them into their housing.

Push downward on the pliers into their
housing until they click into place.
Fuse Location
The fuses, which can be replaced by the
user, are grouped in two boxes below the
passenger side foot board and inside the
trunk.
1 — MINI fuse
2 — J-CASE fuse
WARNING!

When replacing a blown fuse, always use
an appropriate replacement fuse with
the same amp rating as the original fuse.
Never replace a fuse with another fuse of
higher amp rating. Never replace a blown
fuse with metal wires or any other mate
-
rial. Do not place a fuse inside a circuit
breaker cavity or vice versa. Failure to
use proper fuses may result in serious
personal injury, fire and/or property
damage.

Before replacing a fuse, make sure that
the ignition is off and that all the other
services are switched off and/or disen
-
gaged.

If the replaced fuse blows again, contact
an authorized dealer.

If a general protection fuse for safety
systems (air bag system, braking
system), power unit systems (engine
system, transmission system) or steering
system blows, contact an authorized
dealer.
2019_ALFA_GIULIA_COMBINED_UG_USA.book Page 137