Alfa Romeo Giulia 2019, Руководство пользователя

Страница: 126 / 212

STARTING AND OPERATING
124
Accelerating When Overtaking
When driving with ACC activated and
following a vehicle, the system will provide
an additional acceleration up to the ACC set
speed to assist in passing the vehicle. This
additional acceleration is triggered when the
driver utilizes the left turn signal and will
only be active when passing on the left hand
side.
The system detects the direction of traffic
automatically when the vehicle passes from
left-hand traffic to right-hand traffic. In this
case, the overtaking assist function is only
active when the reference vehicle is over
-
taken on the right. The additional accelera -
tion is deactivated when the driver uses the
right direction indicator and returns to the
original lane.
Resuming The Speed
Once the system has been canceled but not
deactivated, to resume a previously set
speed, simply push the RES button and
remove your foot from the accelerator to
recall it.
The system will be set to the last stored
speed.
RES (Resume) Button
Before returning to the previously set speed,
bring the speed close to that value, then
push the RES button and release it.
Setting The Distance Between Vehicles
The distance between your vehicle and the
vehicle ahead may be set to one bar (short),
two bars (medium), three bars (long), or four
bars (maximum).
Distance Icons
The distances from the vehicle ahead are
proportional to speed.
The interval of time with relation to the
vehicle ahead remains constant and varies
from one second (for the short distance
one-bar setting) to two seconds (for the
maximum distance four-bar setting).
The set distance is shown on the display by
a dedicated icon.
The setting is four (maximum) the first time
the system is used. After the distance has
been modified by the driver, the new
distance will be stored also after the system
is deactivated and reactivated.
WARNING!
The Resume function should only be used
if traffic and road conditions permit.
Resuming a set speed that is too high or
too low for prevailing traffic and road
conditions could cause the vehicle to
accelerate or decelerate too sharply for
safe operation. Failure to follow these
warnings can result in a collision and
death or serious personal injury.
2019_ALFA_GIULIA_COMBINED_UG_USA.book Page 124