Alfa Romeo Alfa 147 GTA, Руководство пользователя

Страница: 209 / 290

IN AN EMERGENCY
208
GLOVEBOX LIGHT
(
fig. 45-46
)
To change the bulb proceed as follows:
– Open the glovebox, then remove the
light unit ( A ) levering in the point shown by
the arrow.
– Open the protection ( B ) and change the
snap-fitted bulb.
– Close the protection (
B
) on the trans-
parent cover.
– Refit the light unit inserting it in its cor-
rect position firstly on one end and then on
the other until it clicks into plac.
BOOT LIGHT
(
fig. 47-48
)
To change the bulb proceed as follows:
– Open the tailgate.
– Remove the light unit ( A ) levering in
the point shown by the arrow.
– Open the protective cover ( B ) and re-
place the bulb releasing it from the side con-
tacts, making sure that the new bulb is cor-
rectly clamped between the contacts.
– Close the protective cover again (
B
).
– Refit the light unit inserting it in its cor-
rect position firstly on one end and then on
the other until it clicks into plac.
fig. 45
A0A0181m
fig. 46
A0A0182m
fig. 47
A0A0183m
fig. 48
A0A0184m