Alfa Romeo Alfa 147 GTA, Руководство пользователя, Страница: 202 / 290

IN AN EMERGENCY
201
After replacement, refit
the covers correctly check-
ing that they are properly
secured.
IMPORTANT On the inside surface of
the headlight there could appear a slight
coat of fogging; this does not show a de-
fect, since it is a natural occurrence due to
low temperature and to the degree of hu-
midity in the air; it will soon disappear as
soon as the lights are turned on. The pres-
ence of drops inside the headlight shows
water seepage, refer to the Alfa Romeo
Dealership.
Fog lights
(
fig. 26a
)
IMPORTANT When needing to change
the left bulb, the side trim next to the light
itself needs to be removed to facilitate ac-
cess to the engine compartment.
To change the bulb, proceed as follows:
– Remove the protective cover turning
counter-clockwise.
– Disconnect the electric connector ( A ).
– Release the bulb catch ( B ).
– Remove the bulb and replace it.
– Fit a new bulb, making the tab of the
metal part coincide with the one on the
lamp unit, then hook the bulb holder catch
(
B ).
– Re-connect the electric connector ( A ).
– Refit the protective cover correctly.
Dipped beam headlights
(
fig. 26b
)
To change the bulb, proceed as follows:
– Remove the protective cover releasing
the catches.
– Disconnect the electric connector ( A ).
– Release the bulb catch ( B ).
– Remove the bulb and replace it.
– Fit a new bulb, Fit a new bulb, mak-
ing the tabs of the metallic part coincide
with the grooves on the reflector, then hook
the bulb holder catch (
B ).
– Re-connect the electric connector ( A ).
– Refit the protective cover correctly.
fig. 26a
A0A0161m
fig. 26b
A0A0162m