16/19
ALFA IN a.s.
©
www.alfain.eu
9. JOBS
JOBs are available in both methods – MMA and TIG.
The welding machine has a choice from 10 JOBs.
HOW TO SAVE PARAMETERS TO THE JOB
1. Parameters, which you want to save to the JOB, set by means of the
encoder
V22
. (By short pressing the encoder
V22
switch between
particular parameters of the curve or functions.)
2. As soon as you will have saved all parameters, then by long pressing the
encoder
V22
get into the JOBs menu. The display
V14
will show
-S-
. In the
JOBs menu are two positions:
-S-
(Save) and
-L-
(Load).
3. By short pressing the encoder
V22
confirm the message
-S-
on the display
V14
to save your choice of parameters or functions. The display
V14
will
show numbers from 2 to 11 for particular JOBs. Rotate the encoder
V22
to select the desired JOB number, into which you want to save your
selected parameters, then confirm your choice by short pressing the
encoder
V22
.
HOW TO LOAD THE SAVED JOB
1. By long pressing the encoder
V22
get into the JOBs menu. The display
V14
will show
-S-
.
2. Rotate the encoder
V22
to move to the position
-L-
. By short pressing the
encoder
V22
confirm the position
-L-
.
3. The display
V14
will show numbers from 2 to 11 for particular JOBs. Rotate
the encoder
V22
to select the desired JOB number, from which you want
to load your selected parameters, then confirm your choice by short
pressing the encoder
V22
.
HOW TO DELETE SAVED PARAMETERS FROM THE JOB
It is not possible to delete parameters from the JOB, they can be only replaced
by new parameters. To save new parameters, see the chapter HOW TO SAVE
PARAMETERS TO THE JOB above.
10.
RESET
The factory reset is performed as follows:
1. By long pressing the encoder
V22
get into the JOBs menu. The display
V14
will show
-S-
.
2. Rotate the encoder
V22
to move to the position
-L-
. By short pressing the
encoder
V22
confirm the position
-L-
.
3. Rotate the encoder
V22
and select the number
1
, which is designed for
factory reset
, then confirm your choice by short pressing the encoder
V22
.
