14/19
ALFA IN a.s.
©
www.alfain.eu
Figure 4. TIG welding set up
1. Insert the mains plug into a suitable 1x230 V mains socket.
2. Connect the TIG torch to the panel quick connector (-)
A1
.
3. Connect the earthing cable to the panel quick connector (+)
A3
.
4. Switch the machine on by means of the ON/OFF switch
A6.
5. By means of the welding method switch
V7
select TIG method.
The corresponding LEDs
V4
and
V5
will light up.
6. Connect the to the reduction valve on the gas cylinder and on the gas inlet
connector
A8
on the rear panel.
7. Connect the gas hose of the TIG torch onto gas outlet connector
A2
.
8. Connect the torch control connector onto the matching connector
A4
.
9. By means of the encoder
V22
set the welding current. The values will be
showed on the display
V14
.
