11/19
ALFA IN a.s.
©
www.alfain.eu
(default 0,1 s)
V10
LED – up slope (only for TIG)
0 s – 25,0 s
(default 0,0 s)
V11
LED – values on the display
V14
are in %
V12
LED of setting the time of the spot for TIG
(can only be selected in TIG HF 2T)
0,01 s – 10 s
(default 0,1 s)
V13
LED of welding current
MMA:
5 A – 160 A
5 A – 170 A
(default 80 A)
TIG:
5 A – 160 A
5 A – 200 A
(default 80 A)
V14
Display
V15
LED – down slope (only for TIG)
0 s – 25,0 s
(default 0,0 s)
V16
LED – final current (only for TIG)
5 A – 160 A
5 A – 200 A
(default 5 A)
V17
LED – post gas (only for TIG)
0,1 s – 20,0 s
(default 10,0 s)
V18
LED ALARM
If illuminated there is under or over voltage in
the mains or the machine is overheated.
V19
LED MMA welding current
V20
LED HOT START (only for MMA)
1 – 10
(default 5)
V21
LED ARC FORCE (only for MMA)
1 – 10
(default 3)
V22
Encoder
V23
LED 2T (two stroke)
V24
Button for mode selection - 2T or 4T
V25
LED 4T (four stroke)
V26
LED – values on the display
V14
are in s
