Alfa Laval N Series Скачать руководство пользователя

Страница: 11 / 36

Operating Manual

MATERIAL

USE

MAJOR HAZARD

SILICON SEALANT

GEARBOX SEAL RETAINERS, REAR

RELEASES VAPOUR AT ROOM

COVER, GENERAL SEALANT.

TEMPERATURE.

SEALANT (RED HERMETITE)

GEARBOX SEAL RETAINERS, REAR

RELEASES VAPOUR AT ROOM

COVER, GENERAL SEALANT.

TEMPERATURE, HIGHLY
FLAMMABLE, TREAT AS FIRE
HAZARD.

ANTI-SEIZE COMPOUNDS

BEARINGS

APPLIED FROM AEROSOL.
RELEASES VAPOUR. DISPOSE
OF CONTAINER AS IF
PRESSURISED.

ADHESIVES (E.G. PERMABOND)

BEARING NUTS, ADJUSTMENT NUTS.

RELEASES VAPOUR AT ROOM
TEMPERATURE.

OIL AND GREASE

OIL - GENERAL LUBRICATION

SKIN AND EYE IRRITANT.

GREASE - PRODUCT SEALS,
TIMING GEARS, GENERAL
LUBRICATION.

PLASTIC COMPOUNDS (PTFE,

PTFE - 'O' RINGS, LIP SEALS,

RELEASES FUMES WHEN

POLYPROPLYENE, PVC)

PACKING. POLYPROPLYENE - GLAND

HEATED.

GUARDS. PVC - GLAND GUARDS.

ELASTOMERIC COMPOUNDS

ALL - 'O' RINGS, LIP SEALS. NITRILE,

RELEASES FUMES WHEN

(EP, VITON, NITRILE, NEOPRENE

HEATED.

ARAMID FIBRE

GLAND PACKING.

EMMITS HARMFUL DUST.
RELEASES FUMES WHEN
HEATED.

PAINT

EXTERNAL PUMP SURFACES.

RELEASES DUST AND FUMES
IF MACHINED. TREAT AS A
FIRE HAZARD.

Potential Safety Hazards

The following section gives information on
handling, storage and disposal of parts and
materials used in the pumps which may be
considered hazardous to health.

Please pass this information on to your Safety
Officer, he may need it to comply with Health
and Safety, and COSHH regulations.

Electric motors - the pump may have an electric
motor fitted, ensure that the relevant fire
equipment is available.

The information contained here is brief.

General First Aid

If potentially hazardous substances are
accidentally inhaled, or skin or eyes
contaminated, then the following basic
precautions should be taken

Inhalation -

Remove to fresh air

Skin

Wash with soap and water

Eyes

Flush with water, seek medical
attention

In all cases, if symptoms persist, seek medical
attention.

1.6 Health and Safety Information

Содержание N Series





































Результаты поиска

Содержание N Series

Отзывы:

Похожие инструкции для N Series

Бренды по названию

Популярные бренды

Alfa Laval N Series, Руководство по эксплуатации

Результаты поиска

Содержание N Series

Отзывы:

Похожие инструкции для N Series

Бренды по названию

Популярные бренды