3 Installation
Study the instructions carefully and pay special attention to the warnings!
Always check the Agitator before operation - see chapter 3.3 Pre-use check.
The Agitator is for permanent fastening.
Make sure that the motor correspond to the environment.
Mounting Agitator:
CAUTION
Always ensure that mounting is carried out according to description shown in chapter 6.2 Mounting angle for side mounted
Agitator type ALS and chapter 6.3 Mounting angle for bottom mounted Agitator type ALB.
Always refer to tightening torques in chapter 6.5 Tightening torques for bolt connections when tightening bolts.
Step 1
Place impeller device(s) in the tank.
Ensure that tank and Agitator surfaces are clean.
Ensure that drain (I) is pointing downwards.
For gears with vent screw, ensure the vent is pointing upwards and the rubber plug (III) is removed (see chapter 8.1 Drive unit
instructions).
III
I
4303-0053
1) Standard vent plug
2) Transport securing device
Step 2
Mount the Agitator onto the tank.
18
