3 Installation
Study the instructions carefully and pay special attention to the warnings!
Always check the Agitator before operation - see chapter 3.3 Pre-use check.
The Agitator is for permanent fastening.
Make sure that the motor correspond to the environment.
Welding procedure FSWF, ALS Agitator:
(for mounting flange without nose)
Step 1
Always allow flange to cool to ambient temperature after each section has been welded
Position the flange correctly
TD605-006
A
B
C
D
TD605-007
Step 2
Spot weld from outside.
TD605-010
A
C
D
B
Adjust alignment!
A
C
D
B
TD605-011
Step 3
Weld the following sections first from outside then from inside, and cool
with air between each section.
1
A
B
C
D
4
2
3
TD605-014
14
