26/35
ALFA IN a.s. ©
www.alfain.eu
1. Press (3T) the trigger and keep it pressed to start the crater filler
procedure.
The weld is closed in the same way as with the 4T - 3 LEVELS process.
11. SET-UP (INITIAL SET-UP OF THE WELDING
POWER SOURCE)
With locked status active it is not possible to access this function.
LOOKING PROCEDURE
Set the welding power source ON/OFF switch to “I” to switch on the unit.
P30
Hold down the button.
PERFORM THIS OPERATION BEFORE THE MESSAGE
“SYNCHRONISATION” APPEARS ON THE FOLLOWING DISPLAY: P25
SET
UP
x/y
The message appears on the following displays: P25
x= number of the currently displayed menu page.
y= total number of menu pages.
P2 P1
Use these buttons to scroll through the list of settings to edit.
Activation of the ADJUSTMENTS BLOCK calls for a specific
procedure.
LOOKING PROCEDURE
P28
Using the encoder, edit the value of the selected setting.
P3
Press any button to save the setting and quit the menu.
The unit restarts with the power-up procedure.
