18/35
ALFA IN a.s. ©
www.alfain.eu
3RD LEVEL
The menu contains the settings and values that are changed infrequently and
are to be set up the first time the unit is powered up.
The changed parameters remain saved until the next modification or reset of
the unit.
11 SET-UP (INITIAL SET-UP OF THE WELDING POWER SOURCE)
9. JOBS MANAGEMENT
Personalised welding settings, or JOBs, can be saved in memory locations
and subsequently uploaded.
Up to 99 jobs can be saved (j01-j99).
The settings of the SETUP menu are not saved.
SAVING A JOB
This function is available when welding mode is not active.
P29
Press the button.
The job menu appears in the following displays: P25
P2
P1
Use these buttons to select the following parameter: OPT
The selected parameter is shown by the following symbol:
P28
Use the encoder to select the following setting: SAVE
P2
P1
Use these buttons to select the following parameter: JOB
