10/35
ALFA IN a.s. ©
www.alfain.eu
Picture 4 - Earthing clamp connection
Do not place the earthing clamp on the welding machine or a gas bottle!
Firmly connect the earthing clamp to weldment or welding table.
CONNECTING TO POWER SUPPLY
1. Plug the power plug into the wall socket. Circuit breakers must conform
to the technical dates of the machine.
INSERTING THE WIRE
1. Open the side cover of the wire feeder space
2. Put the wire spool on the wire spool holder
D1
using the adapter
D3
and fix it with the fixing nut
D2
3. Cut off the curved or damaged end of welding wire and lead it through
the inlet liner
E3,
and the roll into the liner inside the EURO torch
connector (about 5 cm). Make sure, that you use the suitable groove.
4. Put the pressure arm
E2
down in that way, that the teeth or the gear fit
and fix it by setting the lever
E1
into vertical position.
5. Adjust the pressure nut that way that it provides constant movement of
wire but it does not deform wire.
Picture 5 - Spool wire holder