Chapter 6 – MIDI Applications
66
Wedge Reference Manual
Receiving Program Changes
In order to recall programs on the Wedge from a MIDI control device (keyboard,
drum pad, guitar or bass controller, sequencer, etc.):
Ê
Connect the control device’s MIDI OUT to the Wedge’s [
MIDI IN
].
Ë
Press the [
UTIL
] button repeatedly until page 2 is selected.
Ì
Move the [
D
] slider to select either
OFF
,
On
or
tbL
.
• When
OFF
, the Wedge ignores incoming program change messages.
• When
On
, program changes received on the MIDI channel the Wedge is set
to will recall the same numbered Program in the currently selected bank
• When set to
tbL
, you can use the Program Change Table to remap incoming
program change messages in order to select any Wedge Program in either
the Preset or User bank (see next section).
Note: It is possible to select either the Preset or User bank via MIDI by sending a
Controller 0 message immediately followed by a program change message. A
Controller 0 with a value of 0 will select the Preset bank, while a value of 1 or higher
(up to 127) will select the User bank.
Program Change Table
The Program Change Table re-maps incoming program change messages so that they
recall Wedge Programs of a different number. Although MIDI program changes only
allow for 128 different programs to be recalled (0–127), the Program Table allows you
to map any incoming MIDI program change message recall any of the 256 Programs
in the Wedge. Example: You can program the Table so that program change 101
recalls Preset 33.
To modify the Program Change Table:
Ê
Press the [
UTIL
] button repeatedly until page 5 is selected.
The display will look like this:
Ë
Move the [
C
] slider to select a MIDI program change number from 000–127 to
be remapped.
Ì
Move the [
D
] slider to select a Wedge Program for the selected MIDI program
change message to be re-mapped to (User 000–127 or Preset 000–127).
Содержание Wedge
