Alesis Wedge, Справочное руководство

Страница: 17 / 84

Chapter 1 – Your First Session with the Wedge
14 Wedge Reference Manual
exits Compare mode; the display will return to its original state and the edited
version of the Program will be restored.
Restoring an Edited Program to its Original
Settings
If you decide to abort the changes you have made to an edited Program, this can be
done in two easy steps:
Ê Press [
PROG
].
The display will exit Edit mode.
Ë
Turn the [
VALUE
] knob to select a different Program, then turn it back the
opposite direction to re-select the original Program. (Alternately, you can press
the [
PROG
] button three times.)
This recalls the stored version of the selected Program number, and the Configuration
name in the display returns to all upper case letters. Consequently, any changes you had
made to the Program before turning the [
VALUE
] knob would be lost. (That is, unless
you stored the edited Program into memory first.)
Bypassing Effects
At any time you can bypass the effects, allowing you to hear the direct signal without
any processing. This can be done by pressing the [
BYPASS
] button.
If the Dry Defeat function is on (see previous section) and the BYPASS button is pressed, no
audio will pass through the unit. Similarly, if the Mix on any program is set to 100% wet and
Bypass is pressed, the unit will not have any audio from its outputs.
J