Alesis GuitarLink Wireless, Быстрый старт

Страница: 3 / 22

1
CONNECTING THE GUITARLINK
Alesis GuitarLink is a plug-and-play device, which means that there
are no drivers to install. The first time you connect it to your
computer, it will automatically install all the necessary driver
components and be ready to use.
ABOUT AUDIO LATENCY
“Latency” is the time it takes for your computer’s soundcard to process incoming data and output a sound.
The lower your latency is, the faster your computer will respond to commands and output sound.
If you experience significant delay between the time you play and the time that the computer outputs audio,
we recommend going into your software’s “Preferences” settings to make sure that your soundcard’s
latency (or buffer) is set to a low number – ideally lower than 15-20ms.
If you still experience too much latency after adjusting your software latency settings, download the free
ASIO4ALL (Audio Stream Input/Output) driver for PC at
www.asio4all.com . ASIO drivers generally
perform better and with lower latency since they create a more efficient communication between audio
devices and software.
AUDIO SETUP
In most cases (especially if you are using Windows) GuitarLink will be automatically selected as your
computer’s default recording device. If you find you are unable to record any audio with GuitarLink, follow
the instructions below for your operating system.
You can use GuitarLink with any digital audio workstation or recording software that supports USB audio
devices. Be sure your audio software program is set up to receive audio via GuitarLink. This can usually
be done in your software’s “Preferences” or “Device Setup.” Please consult your software manual for more
information.
WINDOWS 7
1.
Go to Start Menu
f
Control Panel
f
Hardware and Sound
f
Sound .
2. Select the “Recording” tab.
3. Make sure Microphone – C-Media USB Audio Device is set as the default device, then click “OK.”
SYSTEM REQUIREMENTS:
y
PC: Windows XP, Vista or 7
y
Mac: OS 9 or higher
y
USB Port