background image

106-03-003 

                                                                                                                                            DIV.04 

SPEC NUMBER: 

205-03-250 

 

 

 

 

 

 

取 扱 説 明 書  

INSTRUCTION MANUAL 

 

 

SERIES 5136 

SIM CARD CONNECTOR 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

O 

EDN-108 

02/08 ‘11 

S.Horino 

 

H.Sadatoku 

NO 

EDN/DCN 

DATE 

PREPARED 

CHECK 

APPROVED 

KYOCERA ELCO 
CORPORATION 
ENGINEERING 
DEPT. 

KYOCERA ELCO CORPORATION 

Summary of Contents for 5136 Series

Page 1: ... NUMBER 205 03 250 取 扱 説 明 書 INSTRUCTION MANUAL SERIES 5136 SIM CARD CONNECTOR O EDN 108 02 08 11 S Horino H Sadatoku NO EDN DCN DATE PREPARED CHECK APPROVED KYOCERA ELCO CORPORATION ENGINEERING DEPT KYOCERA ELCO CORPORATION ...

Page 2: ...記に示します Please insert the tray as follows TRAY は下面へ付け CONNECTOR と平行にして真直ぐ挿入を行って下さい Fit the tray to the connector and insert it straightway into the connector TRAY は CONNECTOR と高さを合わせて CONNECTOR と平行にして真直ぐ挿入を行って下さい Fit the tray to the connector and insert it straightway into the connector CONNECTOR 実装面と TRAY 取り付け部高さが同じ高さの場合 When installing the tray on the surface of the same height as the PCB on whic...

Page 3: ...own below or the connector or the tray may be broken TRAY 斜め挿入 抜去 左右方向カード傾き 5 MAX を行わないで下さい Do not insert or pull out the tray at a tilt 5 at max TRAY こじり挿入 抜去を行わないで下さい Do not insert or pull out the tray in a jiggling way こじり挿入 抜去不可 Jiggling insertion pulling out are not allowed 5 以下 5 or less 5 以下 5 or less 5 以下 5 or less 5 以下 5 or less こじり挿入 抜去不可 Jiggling insertion pulling out are not allowed Go...

Page 4: ...cessive stress to the tray when installing inserting and pulling it out TRAY 挿入は アーム先端が両側ともカード間口に入っていることを確認し行ってください Be sure to fit the both arms of the tray inside the card entry of the connector when installing 負荷方向 Do not apply any stress this way アーム飛び出し Arm not installed appropriately Good Good NG NG NG アーム飛び出し Arm not installed appropriately ...

Reviews: