Alesis AI-2 Скачать руководство пользователя страница 86

Страница: 86 / 92

•

System Message. System message, followed by error
message, warning, condition or number.

•

PLL Lost Lock. The AI-2 internal hardware phase lock loop
has lost lock.

•

Video = NTSC. Video sync source detected is NTSC.

•

Video = PAL. Video sync source detected is PAL.

•

Video Lost Lock. Video sync input has lost lock.

•

VSG Not Locked. The video sync generator card (VSG) is not
locked to the system reference.

•

VSG Not Present. The video sync generator card (VSG) has
been selected but is not fitted.

•

VSG On. The video sync generator card (VSG) is on.

•

VSG Off. The video sync generator card (VSG) is off.

•

W/C Frame Err. Internal or external word clock reference for
the ADAT machine has lost lock or is misframed.

8.3C Warnings

•

Abort Save/Read. An abort command to stop a data read or
save operation has been selected, press STORE to confirm or
DISPLAY to cancel.

•

Clear Header. A clear header command has been selected
press STORE to confirm or DISPLAY to cancel.

•

Read From Tape. A read tape data command has been
selected, press STORE to confirm or DISPLAY to cancel.

•

Read SysEx. A read SysEx data command has been selected,
press STORE to confirm or DISPLAY to cancel.

•

Save SysEx. A save data to an external MIDI device command
has been selected, press STORE to confirm or DISPLAY to
cancel.

•

Save to Tape. A save data to tape command has been
selected, press STORE to confirm or DISPLAY to cancel.

Содержание AI-2





























































































Результаты поиска

Содержание AI-2

Отзывы:

Похожие инструкции для AI-2

Бренды по названию

Популярные бренды

Alesis AI-2, Справочное руководство

Результаты поиска

Содержание AI-2

Отзывы:

Похожие инструкции для AI-2

Бренды по названию

Популярные бренды