Alencon BOX -V2
User Manual
8 |
P a g e
2.4 Packing List
In most cases, to minimize carbon impact of shipping as well as cost, the BOX enclosure ships
direct from the cabinet manufacturer to the customer’s designated site. The SPOT or BOSS
units, JBOX, and cables ship from Alencon to the customer site.
BOX Components (already assembled):
(1) BOX Cabinet - Single Bay Outdoor Enclosure, 45U, 19”
(4) Exterior Pad Mounting Feet, 1/2” Anchor Clearance, kit includes (4) feet w/ hardware
(5) Fixed Shelf, 2U 19" Rack, 22.5" Deep, Black Powder Coated 12 GA CRS
(4) Exterior pad mounting feet
Additional System Hardware:
(1) Rack Mounted JBOX (Junction Box – configured for customer application)
(1-4) SPOT/BOSS units with FEED (configured for customer application) — each unit
numbered and marked on the box
(4+4) SPOT/BOSS mounting brackets (left + right)
(16) Bracket mounting screws – ¼”-20 x 3/4 Hex Washer Head w/ Slot, Type F SZP
(22) Rack mounting screws – #10-32 x 1/2" SEMS Screw / Internal Tooth Washer /
Phillips / Pan Head / Steel / Black Oxide
Cabling:
(8) 4-foot power cables with SurLok connectors (unless non-standard wiring
configuration is specified)
(8) 5-foot power cables with SurLok connectors (unless non-standard wiring
configuration is specified)
(3) 2-foot CAT Communication Cables with RJ-45 Connectors
(1) 6-foot CAT Communication Cable with RJ-45 Connectors
(1) PODD unit package with accessories
