Alencon BOX -V2
User Manual
26 |
P a g e
6.2.8.2 Non-Standard Wiring Configurations – Stringed Primary and or Stringed Secondary
Non-standard wiring configurations often include a non-combined stringed connection to the
Primary or Secondary of SPOT/BOSS units within the BOX. In these cases:
Bring stringed pairs directly through conduit to the BOX interior.
Mate cables to corresponding Amphenol connectors on the FEED units. Up to 4 pairs per
SPOT/BOSS unit.
o
For primary side connections, route stringed cable pairs along the left-side
stanchion
o
For secondary side connections, route stringed cable pairs along the right-side
stanchion (see Figure 20)
o
Secure all cables appropriately after installation.
F
IGURE
20:
S
TRINGED
P
AIR
W
IRING
R
OUTED TO
S
ECONDARY
FEED
#2
DO NOT zip-tie the cables too tightly or bend around sharp edges as it may cause breaks
in the cable insulation, which could lead to leakage currents, arcing or ground-faults.
