Alencon BOX -V2
User Manual
9 |
P a g e
3 Important Safety Instructions
SAVE THESE INSTRUCTIONS
– This manual contains important instructions for use
with the BOX that shall be followed during installation and maintenance of these
devices.
WARNING!
Always ground the BOX before energizing the power converters
within.
F
IGURE
1:
T
HE GRAPHIC ABOVE INDICATES THAT THE
BOX
IS A GROUNDING CONDUCTOR
Installation of this equipment must be performed by an authorized electrician in
accordance with the local and NEC ANSI/NFPA 70 and OSHA requirements.
1.
Before installing and using the BOX, read all instructions presented in this manual and the
cautionary markings shown on the enclosure.
2.
During operation, hazardous voltages and currents may be present. Only authorized and
qualified personnel should perform servicing/installation.
3.
Test any wire or terminal for voltage before touching them. Check if any current is flowing
through the strings before disconnection.
4.
Only use accessories recommended or approved by the manufacturer.
5.
Ensure that wiring is in good conditions and that all wiring is sized according to NEC 310-16
specifications. Ignoring to do so may result in a risk of fire.
6.
Always have BOX manual on hand, for reference.
