7
Your window kit has been designed to fit most standard
vertical and horizontal opening window It
may be necessary for you to modify some aspects of
the installation procedures for certain window types.
Please refer to Fig.11 & 11a for the minimum and maximum
window openings.
Window Kit Installation
Horizontal
window
Window Slider Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
Window Slider Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
Horizontal
window
This unit is equipped with an internal water tank, two full-safe
switch mechanisms, one is used to control the water pump
drainage, the other is used to monitor the water level inside
the internal water tank. When the water level reaches a
predetermined level, the full-safe switch mechanism is
activated. The digital display shows P1 and the water full
indicator light illuminates. Carefully move the unit outside,
remove the rubber blockage from the back drainage hole
and drain the water off. The unit will continue operating
properly.
Drain Tank Safety Feature
MAINTENANCE
1) BE SURE TO UNPLUG THE UNIT BEFORE CLEANING.
2) DO NOT USE GASOLINE, THINNER OR OTHER CHEMICALS TO CLEAN THE UNIT.
3) DO NOT WASH THE UNIT DIRECTLY UNDER A TAP OR WITH A HOSE DUE TO ELECTRICAL
HAZARDS.
4) IF THE POWER CORD IS DAMAGED, IT SHOULD BE REPAIRED BY THE MANUFACTURER OR ITS
AUTHORIZED REPAIR AGENCY.
1 AIR FILTER
- Clean the air filter at least once every two weeks to
prevent interior fan damage due to an accumulation of dust.
- Removal
Pull out the filter cover and remove the air filter from the
filter cover.
- Cleaning
Wash the air filter by immersing it gently in warm water
with a neutral detergent. Rinse the filter and let it dry.
- Mounting
Attach the air filter to the filter cover using the attachment
hooks on the inner surface of the cover. Put the filter cover
back to the unit.
2 UNIT ENCLOSURE
- Use a damp lint-free cloth to clean the unit enclosure.
Dry with a dry clean cloth.
Fig.11
Fig.11a
Fig.12
IMPORTANT:
Содержание MPF-12CR
Страница 17: ......
