-34-
INSTALLATION
The outdoor unit can be installed outdoors on a horizontal or vertical object
such as the top of a wall, a beam or shelf, or against a wall.
We recommend you to register the outdoor unit on the indoor unit before
installing the outdoor unit on a suitable spot. The outdoor unit will measure
the outdoor temperature and humidity. Since the temperature sensor is
placed inside the plastic box, the displayed temperature can be higher than
the actual temperature when exposing the box to direct sunlight
Outdoor unit batteries installation:
Remove the battery cover from the rear of the outdoor unit by loosening the
screw and sliding the battery cover down.
AAA
1,5V
AAA
1,5V
Insert 2 x AAA 1.5V Alkaline batteries into the battery compartment, paying
attention to the correct polarity.
Now replace the battery cover.
Because the outdoor and indoor unit cooperate together using a unique
code, the batteries of both units should be installed directly after one
another. After this installation, the code will be synchronized within the first
few minutes.
