ALDI 49291 Скачать руководство пользователя | Manualshive

Страница: 19 / 40

background image

Understanding and using these operating instructions

190cc 4 Stroke Petrol Lawn Mower

AFTER SALES SUPPORT

e-mail: [email protected]

1800 909 909

MODEL: №.

49291 • 08/2015 • 49291

(toll free)

Operating instructions and safety notes!

AFTER SALES SUPPORT

(toll free)

190cc 4 Stroke Petrol Lawn Mower

e-mail: [email protected]

1800 909 909

MODEL: №.

49291 • 08/2015 • 49291

17

Assembly of the Side Discharge Chute

WARNING:

Ensure the motor is NOT operating when fitting the side

discharge chute.

Do not operate or have the motor running when the side ejector cover is
opened and the discharge chute is not fitted.

NOTE:

The side discharge chute is used to distribute grass clippings from

the side of the mower while the mower is in use. To use this function, the
60L hard catcher (14) is NOT required to be assembled on the lawn mower.
1. Raise the side ejector cover (21) to be able to position the side discharge

chute (22) onto the side of the deck of the lawn mower. (Fig L)

2. Place the side discharge chute (22) into position on the side of the deck,

by aligning the 2 top tabs on the side discharge chute (22) with the bars
on each side at the top of the side ejector cover (21), and then place the
2 top tabs underneath the bars to secure (Fig M). Release the side ejector
cover (21). (Fig N)

3. To remove the side discharge chute (22), raise the side ejector cover (21),

and remove the side discharge chute (22). Lower the side ejector cover
(21).

N.

M.

Slide tabs under bars

Raise ejector cover

L.

«
...
17
18
19
20
21
...
»

Содержание 49291









































Отзывы:

Нет отзывов

Похожие инструкции для 49291

Бренд: MTD Страницы: 6

Бренд: Qualcast Страницы: 24

Бренд: Spearhead Страницы: 64

Бренд: Murray Страницы: 56

Бренд: Qualcast Страницы: 15

Бренд: Weed Eater Страницы: 16

Бренд: Dolmar Страницы: 76

Бренд: Craftsman Страницы: 68

Бренд: Craftsman Страницы: 20

Бренд: Craftsman Страницы: 72

Бренд: Craftsman Страницы: 24

Бренд: Craftsman Страницы: 20

Бренд: Craftsman Страницы: 84

Бренд: Craftsman Страницы: 24

Бренд: Craftsman Страницы: 24

Бренд: Craftsman Страницы: 24

Бренд: Craftsman Страницы: 24

Бренд: Craftsman Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды