ALDI 49291 Скачать руководство пользователя

Страница: 28 / 40

Understanding and using these operating instructions

190cc 4 Stroke Petrol Lawn Mower

AFTER SALES SUPPORT

e-mail: [email protected]

1800 909 909

MODEL: №.

49291 • 08/2015 • 49291

(toll free)

Operating instructions and safety notes!

AFTER SALES SUPPORT

(toll free)

190cc 4 Stroke Petrol Lawn Mower

e-mail: [email protected]

1800 909 909

MODEL: №.

49291 • 08/2015 • 49291

Maintenance
Replacing the Blades

Note.

Before making any adjustment or

maintenance procedures to the lawn mower ensure

it is turned off and the spark plug lead is removed.

Note.

Wear heavy gloves to protect your hands.

1. With the engine switched off, remove the 60L

hard catcher (14) and lift the front of the lawn

mower upwards so the upper handles (1) sit on

the ground and the spark plug faces upwards.

2. Remove the blade bolt (31) using a 17mm spanner (not supplied) by

turning in an anti-clockwise direction (Fig AG), then remove the outer

flange (32) (Fig AH). This allows you to be able to remove the blade

mounting plate (37) from the lawn mower.

3. To remove a single blade from the blade mounting plate (37), again use

a 17mm spanner (not supplied) to loosen and remove the nut, screw and

washers. (Fig AI/AJ)

NOTE:

There is 1 washer located under the screw

on the outer side of the blade mounting plate (37),

and one on the underside of the blade mounting

plate in between the blade and blade mounting

plate (37). Be careful not to lose these.
4. Repeat the process to remove the other

3 blades.

5. Clean the dirt and grass from around the

blade mounting area.

AG.

AJ.

AI.

AH.

AK.

Содержание 49291









































Результаты поиска

Содержание 49291

Отзывы:

Похожие инструкции для 49291

Бренды по названию

Популярные бренды

ALDI 49291, Руководство пользователя

Результаты поиска

Содержание 49291

Отзывы:

Похожие инструкции для 49291

Бренды по названию

Популярные бренды